The hydraulic press for bonded stone panels. A loaded table slides in, the platen presses, the table slides out.
The Spyder Hercules is designed to apply consistent, evenly distributed pressure across the entire stone and Spydercore panel assembly during the adhesive curing process. Once the stone and Spydercore have been bonded and stacked on the table, the system moves the assembly into the press, where the platen applies uniform pressure across the full surface. After the cycle, the platen lifts and the table rolls out, ready for the Spyder to cutt it.
The technical data of the Hercules. Ask for the full technical sheet.
| Axis pressing stroke | 31.1 in790 mm |
|---|---|
| Max pressure | 30k lbs15 Ton |
| Stack positioning travel | 94.1 in2390 mm |
| Stack output power | 2.2 KW |
| Maximum slab dimensions | 141.73 in x 86.6 in3600 mm x 2200 mm |
| Dimensions (width) | 175.2 in4450 mm |
| Dimensions (length) | 209.45 in5320 mm |
| Dimensions (height) | 108.27 in2750 mm |
| Weight | 15k lbs7000 kg |
| Voltage | 400 V +/-10% (50-60Hz) |
| Total power installed | 10 KW |
| Differential protection | 25 A |