THE MACHINE
SPYDER.
Diamond-wire splitting. One stone slab goes in, two slabs come out. Cut it flat, or profile the cut.
Spyder slab splitter is a high precision solution for natural stone production.
It transforms one slab into two, using advanced wire cutting and Spydercore technology.
Up to 72% weight reduction, with surface integrity and natural textures fully preserved.
One slab in. Two out. More value from every cut.
the slab splitter.
one slab in. two out.
Spyder precisely splits a single stone slab into two thinner and lighter slabs reinforced with a high performance spydercore.
LIVE SIMULATION
WATCH THE SPYDER CUT.
Scroll to run the machine. Switch between a flat cut and a profiled cut.
[Animated simulation: it appears in Preview and on the live site]
- 01 LoadThe slab enters the gantry
- 02 CutThe diamond wire runs through the stone
- 03 SeparateThe two halves part
- 04 Two slabsOne pass, two slabs
PROFILING
FLAT OR PROFILED.
The Spyder does not only split flat. The wire can follow a profile, so the cut surface is no longer a plane. Both slabs come out with a matching relief, from one single cut.
- Flat: two flat slabs
- Profiled: two slabs with a matching relief
[Profile diagrams: they appear in Preview and on the live site]
THE MACHINE UP CLOSE
BUILT AROUND THE WIRE.
- s01.jpg|The Spyder|w
- s03.jpg|The diamond wire|t
- s10.jpg|Control cabinet and touchscreen|w
- s15.jpg|Cutting with water cooling|t
- s16.jpg|The cut in the stone
- s17.jpg|Profile: top slab and bottom slab|d
- s09.jpg|Front view
- s08.jpg|The gantry
- s02.jpg|The head
- s06.jpg|The roller
- s07.jpg|The wire head and the roller
- s05.jpg|The honeycomb edge
- s11.jpg|The conveyor table
- s04.jpg|The gantry from above
- s12.jpg|The stone on the table
- s13.jpg|Side of the machine
- s14.jpg|From above
IN OPERATION
SEE IT RUNNING.
SPECIFICATIONS
THE NUMBERS.
The technical data of the Spyder. Ask for the full technical sheet.
| Dimensions | 252(L) x 208.7(W) x 78.7(H)6400 x 5300 x 2000 mm |
|---|---|
| Cutting area Maximum slab size | 145.7 x 86.6 inches3700 x 2200 mm |
| Weight | 5 512 lbs2500 kg |
| X axis stroke | 162.2 in4120 mm |
| Z axis stroke | 5.91 in150 mm |
| Cutting speed | 0.4 – 2.0 m/h |
| Diamond wire | Diameter: 0.15" / 3.8 mm Length: 378.7" / 9.62 m |
| Motor power | 11 kW – 15 HP |
| Electrical requirements | 400 V (50 Hz) |
| Water requirements | Min 3 bar Max 5 bar |
| Air source requirements | Min 6 bar Max 12 bar |
| Internet requirements | Ethernet cable |